Electric Pump

From GT New Horizons

The Electric Pump is a component used in the crafting of several GregTech 5 electric machines, but more importantly also functions as a cover that can be used to automate fluid extraction and insertion. When it is attached to a machine, it will require power. Each tier of the Electric Pump has a different speed; every tick it will attempt to move fluid, if it succeeds it will consume 1 EU per 10L of fluid. If the pump is attached to a pipe however, it is not capable of consuming power, so it still functions just the same, but does not require power.

A Crowbar can be used to remove an Electric Pump from a machine, cable, or pipe that it is attached to.

Modes

The Electric Pump has several different operating modes. The active mode can be switched using a Screwdriver.

Mode Description
Export Fluid is taken from the attached machine's output tank, and pushed into the input tank of the machine the cover faces.
Import Fluid is taken from the output tank of the machine the cover faces, and pushed into the attached machine's input tank.
Export (conditional) If allowed by a Machine Controller, Fluid is taken from the attached machine's output tank, and pushed into the input tank of the machine the cover faces.
Import (conditional) If allowed by a Machine Controller, Fluid is taken from the output tank of the machine the cover faces, and pushed into the attached machine's input tank.
Export (invert cond) If disallowed by a Machine Controller, Fluid is taken from the attached machine's output tank, and pushed into the input tank of the machine the cover faces.
Import (invert cond) If disallowed by a Machine Controller, Fluid is taken from the output tank of the machine the cover faces, and pushed into the attached machine's input tank.
Export allow Input Fluid is taken from the attached machine's output tank, and pushed into the input tank of the machine the cover faces. Additionally, fluid can be pushed into the attached machine's input tank through the side covered by the Conveyor.
Import allow Output Fluid is taken from the output tank of the machine the cover faces, and pushed into the attached machine's input tank. Additionally, fluid can be pulled from the attached machine's output tank through the side covered by the Conveyor.
Export allow Input (conditional) If allowed by a Machine Controller, Fluid is taken from the attached machine's output tank, and pushed into the input tank of the machine the cover faces. Additionally, fluid can be pushed into the attached machine's input tank through the side covered by the Conveyor.
Import allow Output (conditional) If allowed by a Machine Controller, Fluid is taken from the output tank of the machine the cover faces, and pushed into the attached machine's input tank. Additionally, fluid can be pulled from the attached machine's output tank through the side covered by the Conveyor.
Export allow Input (invert cond) If disallowed by a Machine Controller, Fluid is taken from the attached machine's output tank, and pushed into the input tank of the machine the cover faces. Additionally, fluid can be pushed into the attached machine's input tank through the side covered by the Conveyor.
Import allow Output (invert cond) If disallowed by a Machine Controller, Fluid is taken from the output tank of the machine the cover faces, and pushed into the attached machine's input tank. Additionally, fluid can be pulled from the attached machine's output tank through the side covered by the Conveyor.

Fluid Rates

Tier Fluid per second (L) Fluid per tick (L)
LV 640 32
MV 2560 128
HV 10240 512
EV 40960 2048
IV 163840 8192
LuV 327680 16384
ZPM 655360 32768
UV 1310720 65536

See also

Selection Grid


Content in this page has been copied and possibly modified from the FTB Gamepedia Wiki at (Electric_Pump_(GregTech_5)). Such content is under the CC BY-NC-SA 3.0 License.